BVLYP - METALSHIELD ELASTO CTG - WHITE
- MSDS: BVLYP
- Manufacturer: MONSEY PRODUCTS CO
- Product Name: METALSHIELD ELASTO CTG - WHITE
- National Stock Number: 5610-00N052301
Product Identification
Product ID:METALSHIELD ELASTO CTG - WHITE
MSDS Date:08/20/1993
FSC:5610
NIIN:00N052301
MSDS Number: BVLYP
Responsible Party
KIMBERTON, PA 19442
US
Emergency Phone: 215-933-8888
Info Phone: 215-933-8888
Cage: 6W507
Contractor
Telephone: 610-933-8888
Cage: 6W507
Ingredients
0.1 @ 68F
CAS: 107-21-1
RTECS: KW2975000
OSHA PEL N/K
ACGIH TLV: 50 PPM, VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
CAS: 25265-77-4
RTECS: UF6000000
OSHA PEL N/K
ACGIH TLV: N/K
1 @ 87F
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
23 @ 77F
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: PROLONGED OVEREXPOSURE MAY
CAUSE COUGHING, SHORTNESS OF BREATH, DIZZINESS & INTOXICATION.
EYES: MAY CAUSE MODERATE IRRITATION INCLUDING BURNING SENSATION,
TEARING, REDNESS OR SWELLING. SKIN: CE RTAIN INDIVIDUALS MAY SHOW
DERMATITIS OR ALLERGENIC REACTIONS ON REPEATED CONTACT. INGEST: MAY
BE A (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: HEALTH HAZARD IF INGESTED IN LARGE
QUANTITIES. CHRONIC: SANDING OR OTHERWISE PULVERIZING THIS PRODUCT
WHEN DRY CAN PRODUCE RESPIRABLE SILICA, A 2A CARCINOGEN (IARC). AT
SUCH TIME USE A NIOSH /MSHA APPROVED RESPIRATOR.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE FROM VAPOR IMMEDIATELY. IF OVERCOME, CALL MD.
IF BREATHING STOPPED OR IRREGULAR, START RESUSCITATION OR
ADMINISTER OXYGEN AS NEEDED. EYES: IMMEDIATELY FLUSH WITH PLENTY OF
WATER FOR AT L EAST 15 MINUTES & CONSULT MD. SKIN: WASH SKIN
THOROUGHLY WITH SOAP & WATER. IF DRENCHED, REMOVE & WASH CLOTHING
BEFORE REUSE. INGEST: GET PROMPT MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:KEEP PEOPLE AWAY. RECOVER FREE LIQ. ADD ABSORB
(SAND, EARTH, SAWDUST, ETC) TO SPILL AREA. AVOID BRTHG VAPS. VENT
CONFINED SPACES. OPEN ALL WINDOWS & DOORS. KEEP PRODS OUT OF SEWERS
& WATERCOURSES BY D IKING OR IMPOUNDING. ADVISE AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT HANDLE OR STORE NEAR HEAT OR STRONG OXIDANTS. KEEP FROM
FREEZING. ADEQUATE VENTILATION REQUIRED.
Other Precautions:AVOID BREATHING VAPORS. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN. REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE
REUSE. REMOVE CONTAMINATED SHOES & THOROUGHLY DRY BEFORE REUSE.
Exposure Controls
Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
OTHERWISE WEAR NIOSH/MSHA APPROVED RESPIRATOR WHERE CONCENTRATED
VAPORS ARE ACCUMULATED.
Ventilation:FACE VELOCITY 60FPM. USE ONLY WITH ADEQUATE VENTILATION.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:USE CHEMICAL-RESISTANT APRON OR OTHER
CLOTHING TO AVOID REPEATED OR PROLONGED SKIN CONTACT. EMERG EYE
WASH & (SUPDAT)
Work Hygienic Practices:WASH SKIN THOROUGHLY WITH SOAP & WATER AFTER
CONTACT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. OTR PROT EQPT: DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Vapor Density:>1
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:FULLY DILUTABLE
Appearance and Odor:WHITE CREAMY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE FEDERAL, STATE
AND LOCAL DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.